JMC Dry Chain Spray 300 ml

JMC Dry Chain Spray 300 ml

Fully synthetic special lubricant, light in colour, strongly adhesive, with anti-aging, corrosion and wear additives. The high solids content of PTFE ensures a grease-free seal on the entire surface.

 

Performance:

Recommended for O-ring and X-ring chains.
Excellent adhesion, does not drip or come off
economic use
Wax-like dry film, so dirt does not stick
Water repellent, extreme protection against corrosion
Excellent damping properties
Excellent flow and penetration properties
Very steady against ageing, and also against aggressive environments
Low friction values, low wear
Extremely resistant to UV rays
 

Application range:

For the lubrication of all chains, sliding surfaces, splined shafts, cardan and universal joints, spindles, guides and gears.
Use especially in dusty environments
 

Application:

Shake well before use. The surfaces must be dry and free of dust and grease. Apply a thin coat of dry chain spray. Respray with a thin layer after about 2 minutes. Allow to dry very well before loading.

presentation

300ml Spray Pack

Delivered by units.