Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Frame Triangle Tidy Kit 2.0 - Yamaha...
510.02.10
new
Frame Triangle Tidy Kit 2.0 - Yamaha SR250 - JADUS
Available
Notice: Latest units available!
Available on:
The kit every SR250 owner has been waiting for! Now version 2.0 - updated and improved, including all fastenings and even parts to create a wire harness extension - plug and play and tested and reviewd by our very own customers!
This kit solves the headache of relocating the battery and the electrics to get the infamous 'clean triangle' look - allowing you to remove the stock airbox, battery box and side covers - and even install a pod filter.
The specially developed electrics tray bolts straight to the SR250 frame into the three existing fastening points. It can then be used to tidy all the electrics and even attach the regulator rectifier if so desired - making it possible to remove the frame cross bracket where it is usually attached.
The battery tray bolts to the rear of the engine into the existing mounting plate - putting it completely out of site and has the added benefit of creating a lower centre of gravity for the bike - improving handling. The bracket also has a special flange that can be used to mount the starter relay. The tray is designed for either a lithium Antigravity 8 cell battery (or even a 4 cell if needed), a Ballistic Performance 8 cell battery, or a Shorai small case battery (LFX14L2-BS12) - ie. the kit will not work with the stock battery. But in this way, you will achieve a huge weight savings! You will also need to remove the centre stand if you have one - but, this will save you further weight!
The size of the supported batteries is a maximum of 107x87x55 mm, and you have a model that can fit in that space, you can find the available ones in these links:
- Lithium battery JMTZ5S-FP
- Skyrich HJP7L-FP Lithium Battery
- Lithium Battery JMT7L-FP
Both the electrics and battery tray are made from strong 3mm thick stainless steel plate so will hold up to the elements extremely well. If you want to paint them to fit the look of your bike, any car body or rim paint will work nicely - just make sure the surfaces are clean and free from any oils.
Get 'em while they're in stock!
This article is served by units
This item will be delivered within 15 days
Recambios | Chassis |
Tachometer Drive Blanking Plug Yamaha SR 250 - JADUS
20 Degree Exhaust Header Extension Yamaha SR 250 - JADUS
Rigid Intake Manifold - Yamaha SR250 - Jadus Motorcycles
Yamaha SR250 Air/Fuel Screw Kit - JADUS
Yamaha SR250 Magnetic Oil Drain Sump Plug - JADUS
Low Exhaust Manifold - Yamaha SR 250 - JADUS
200mm CC Frame Loop Kit - Yamaha SR 250 - JADUS
Yamaha SR 250 Speedo Bracket - Center Mount - JADUS
Yamaha SR 250 Ignition Relocation Kit - JADUS
Yamaha Dripping Tuning Forks Logo Sticker - JADUS
Mikuni BS34 Replacement Carb Diaphragm - Yamaha SR250 - JADUS
Universal Aluminium Motorcycle Guard / Fender / Mudguard - JADUS
Ignition Advance Bracket - Yamaha SR250 - JADUS
Complete Exhaust Kit with Terminal - Yamaha SR250
Yamaha SR 250 Stronger Clutch Spring Kit - JADUS
EUCLID Seat Base Uncovered - Yamaha SR 250 - JADUS
EUCLID SR250 Seat Kit - Bolt On Styling Kit
Yamaha SR 250 Euclid Bronze Seat - JADUS