Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Relay for LED Flashers 12V 3 Legs
302.05.11
new
Relay for LED Flashers 12V 3 Legs
available
Notice: Latest units available!
Available on:
To replace standard turn signals with LED flashers, it is necessary, if you do not install a resistor for each pair of turn signals, to replace the corresponding relay with a specific relay for LED flashers.
guy:
3-pole flat plug connector
Rated voltage:
12V
Switching capacity:
1 watt - 130 watts
Connectors:
E: Mass
B: Battery
L: Switch
flicker:
85 per minute
Including clamping plate
NOTE: For power flashers less than 0.5W, additional resistance may be required.
This item is served by units.
This item will be delivered within 15 calendar days.
Recambios | Electric |
Adapter tubes Vacuometer Kawa-Suzuki M6x1,0x40 mm
Additional fuel tank 1 liter with support
Fork retainer assembler, for 35 and 36 mm
Universal Battery Disconnector Switch
Motor Ventilation Filter 13 mm Rubber connection Universal, round and chromed.
Ignition cable 7mm Silicone - 1 mt - Black
Ignition cable 7mm Silicone - 1 mt - Yellow
Ignition cable 7mm Silicone - 1 mt - Red
Ignition cable 7mm Silicone - 5 mt - Black
Black T-handle allen Hazet wrenchfrom 2.5 to 10 mm SW
T-handle screwdriver box JMP 20 pieces
Set Allen screwdrivers JMT handle in T 8 pieces
Set torx screwdrivers JMP handle in T 9 pieces
Dial punches numbers Impact 9 pieces
Marking punches letters Impact 27 pieces
Jointless Hook Wrench 60-65 mm JMP
Repair Thread Helicoil Assorted Box 132 piecesM6-M8-M10
Gimbal adapter for 1/2 inch glass keys
Profy Dry Lube Chain Lubrication Pack 400 ml
Nozzle and gum gauge 20 sizes 0.45-1.50 mm
Thickness gauge 0.05-1.00 mm 20 sheets 100 mm
Thickness gauge 0.203-0.660 inches 12 Angled Laminillas
Nozzle and gum gauge 16 sizes 1.50-3.00 mm
Tornilleria measurement and testing template
Tormilleria H2 measurement and testing template
Ignition point adjuster - 2 and 4 timesM10/M12/M14